Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1661

Defaults N/A

Command Modes

• VRF mode

• CONFIGURATION mode

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.

Usage Information

It is possible to congure multiple import conditions per VRF depending on the exporting VRF.

The export-target and import-target support only the match the protocol and prex-list options. Other options that

you congure in the route-maps are ignored.

Related Commands

• ipv6 route-export — exports IPv6 routes to another VRF.

match source-protocol

Specify matching source-protocol criteria while exporting or importing routes.

Syntax

match source-protocol {bgp | isis | ospf | connected | static}

Parameters

bgp Enter the keyword bgp to leak or share routes corresponding to the BGP protocol.

isis Enter the keyword isis to leak or share routes corresponding to the ISIS protocol.

ospf Enter the keyword ospf to leak or share routes corresponding to the OSPF protocol.

connected Enter the keyword connected to leak or share connected routes corresponding to the

VRF.

static Enter the keyword static to leak or share static routes corresponding to the VRF.

Command Modes ROUTE MAP MODE