Administrator Guide
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The following describes the show vrrp brief command.
Item Description
Interface Lists the interface type, slot, and port of the congured VRRP group.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If you congured the track
command to track that interface and you disable the interface, the cost is subtracted
from the priority value assigned to the interface.
Pre States whether preempt is enabled on the interface:
• Y = Preempt is enabled.
• N = Preempt is not enabled.
State Displays the operational state of the interface using one of the following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER router).
• BACKUP (the interface associated with the BACKUP router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers associated with the interface.
Example (Brief)
Dell> Interface Grp Pri Pre State Master addr Virtual addr(s)
Description--------------------------------------------------
Gi 1/37 1 100 Y Master 200.200.200.200 200.200.200.201
Gi 1/37 2 100 Y Master 200.200.200.200 200.200.200.202 200.200.200.203
1714 Virtual Router Redundancy Protocol (VRRP)