Administrator Guide

Related Commands
• deny — congure a MAC ACL lter to drop packets.
• seq — congure a MAC ACL lter with a specied sequence number.
IP Prex List Commands
When you create an access-list without any rule and then apply it to an interface, the ACL behavior reects implicit permit.
To congure or enable IP prex lists, use these commands.
clear ip prex-list
Reset the number of times trac mets the conditions (“hit” counters) of the congured prex lists.
Syntax
clear ip prefix-list [prefix-name]
Parameters
prex-name (OPTIONAL) Enter the name of the congured prex list to clear only counters for that
prex list, up to 140 characters long.
Defaults Clears “hit” counters for all prex lists unless a prex list is specied.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to
16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related Commands
• ip prex-list — congure a prex list.
238 Access Control Lists (ACL)