Administrator Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information
After CAM conguration for ACL VLAN groups is performed, you must reboot the system to enable the settings to
be stored in nonvolatile storage. During the initialization of CAM, the chassis manager reads the NVRAM and
allocates the dynamic VCAP regions.
The following table describes the output elds of this show command:
Field Description
Chassis Vlan Cam
ACL
Details about the CAM blocks allocated for ACLs for various VLAN operations at a
system-wide, global level.
Stack Unit
<number>
Details about the CAM blocks allocated for ACLs for various VLAN operations for a
particular stack unit.
Current Settings(in
block sizes)
Information about the number of FP blocks that are currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open ow operations.
VlanIscsi Number of FP blocks for VLAN internet small computer system interface (iSCSI)
counters.
VlanHp Number of FP blocks for VLAN high performance processes.
VlanFcoe Number of FP blocks for VLAN Fiber Channel over Ethernet (FCoE) operations.
VlanAclOpt Number of FP blocks for ACL VLAN optimzation feature.
Example
Dell# show cam-acl-vlan
-- Chassis Vlan Cam ACL --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 0
VlanAclOpt : 2
VlanHp : 1
VlanFcoe : 1
Dell#
cam-acl-vlan
Allocate the number of ow processor (FP) blocks or entries for VLAN services and processes.
Syntax
cam-acl-vlan { default | vlanopenflow <0-2> | vlaniscsi <0-2> | vlanaclopt
<0-2>
326 Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)