Administrator Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Example
Dell# show interfaces status
Port Description Status Speed Duplex Vlan
Gi 1/1 Up 1000 Mbit Auto --
Gi 1/2 Down Auto Auto 1
Gi 1/3 Down Auto Auto 1
Gi 1/4 Down Auto Auto --
Gi 1/5 DellPort Up 1000 Mbit Auto 30-130
Gi 1/6 Down Auto Auto --
Gi 1/7 Down Auto Auto --
Gi 1/8 Up 1000 Mbit Auto 1502,1504,1506-1508,1602
Gi 1/9 Down Auto Auto --
Gi 1/10 Down Auto Auto --
Gi 1/11 Down Auto Auto --
Gi 1/12 Down Auto Auto --
Gi 1/13 Down Auto Auto --
Gi 1/14 Down Auto Auto --
Gi 1/15 Down Auto Auto --
Gi 1/16 Down Auto Auto -Dell#
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE 802.1Q tag status
and VLAN membership.
Syntax
show interfaces switchport [interface-type | stack-unit unit-id ]
Parameters
interface-type (OPTIONAL) Enter one of the following keywords and the interface information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Interfaces 689