Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

721

722

723

724

725

726

727

728

729

730

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Pre-version 8.3.7.0 Introduced on the E-Series.

Example

Related Commands

• ip udp-helper udp-port — enable the UDP broadcast feature on an interface.

• show ip udp-helper — display the congured UDP helper(s) on all interfaces.

ip udp-helper udp-port

Enable the UDP broadcast feature on an interface either for all UDP ports or a specied list of UDP ports.

Syntax

ip udp-helper udp-port [udp-port-list]

To disable the UDP broadcast on a port, use the no ip udp-helper udp-port [udp-port-list]

command.

Parameters

udp-port-list (OPTIONAL) Enter up to 16 comma-separated UDP port numbers.

NOTE: If you do not use this option, all UDP ports are considered by default.

Defaults None

Command Modes INTERFACE (cong-if)