Administrator Guide
Parameters
vrf vrf-name (Optional) Enter the keyword vrf and then the name of the VRF to clear the routes
corresponding to that VRF.
* Enter an asterisk (*) to clear all learned IP routes.
ip-address mask Enter a specic IP address and mask in dotted decimal format to clear that IP address
from the routing table.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.9.1.0 Introduced VRF on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information
Use the vrf vrf-name attribute of this command to clear routes corresponding to either a specic VRF or the
default VRF.
You cannot use this attribute to clear routes corresponding to a management VRF.
Related Commands
• ip route — assign an IP route to the switch.
• show ip route — view the routing table.
• show ip route summary — view a summary of the routing table.
IPv4 Routing 745