Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

841

842

843

844

845

846

847

848

849

850

Command Modes ROUTER ISIS

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Usage Information

To prevent the link state database from receiving incorrect routing information from unauthorized routers, use the

area-password command on routers within an area.

The congured password injects into Level 1 LSPs, CSNPs, and PSNPs.

Related Commands

• domain-password — set the authentication password for a routing domain.

• isis password — congure an authentication password for an interface.

clear cong

Clear IS-IS congurations that display under the router isis heading of the show running-config command output.

Syntax

clear config

Command Modes ROUTER ISIS

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.