Administrator Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Hello PDUs are “padded” only when both the global and interface padding options are ON. Turning either one OFF
disables padding for the corresponding interface.
Related Commands
• hello padding — turn ON or OFF padding for LAN and point-to-point hello PDUs.
isis ipv6 metric
Assign metric to an interface for use with IPv6 information.
Syntax
isis ipv6 metric default-metric [level-1 | level-2]
To return to the default values, use the no ipv6 isis metric [default-metric] [level-1 |
level-2] command.
Parameters
default-metric Metric assigned to the link and used to calculate the cost from each other router via the
links in the network to other destinations. You can congure this metric for Level 1 or
Level 2 routing. The range is from 0 to 16777215. The default is 10.
level-1 (OPTIONAL) Enter the keywords level-1 to congure the shortest path rst (SPF)
calculation for Level 1 (intra-area) routing. This value is the default.
level-2 (OPTIONAL) Enter the keywords level-2 to congure the SPF calculation for Level 2
(inter-area) routing.
Defaults default-metric = 10; level-1 (if not otherwise specied)
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
Intermediate System to Intermediate System (IS-IS) 875