Administrator Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage Information BGP to IS-IS redistribution supports “match” options using route maps. You can set the metric value, level, and
metric-type of redistributed routes by the redistribution command. You can “set” more advanced options using
route maps.
Example
Dell(conf)# router is
Dell(conf-router_isis)# redistribute bgp 1 level-1 metric 32 metric-type
external route-map rmap-isis-to-bgp
Dell(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external route-map
rmap-isis-to-bgp
redistribute ospf
Redistribute routing information from an OSPF process.
Syntax
redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal |
external}] [metric metric-value] [metric-type {external | internal}] [route-map
map-name]
To return to the default values, use the no redistribute ospf process-id [level-1| level-1-2
| level-2] [match {internal | external}] [metric metric-value][metric-type
{external | internal}] [route-map map-name] command.
Parameters
process-id Enter a number that corresponds to the OSPF process ID to be redistributed. The range is
from 1 to 65355.
metric metric-value (OPTIONAL) The value used for the redistributed route. Use a metric value that is
consistent with the destination protocol. The range is from 0 to 16777215. The default is
0.
metric-type
{external | internal}
(OPTIONAL) The external link type associated with the default route advertised into a
routing domain. The two options are:
• external
892 Intermediate System to Intermediate System (IS-IS)