Administrator Guide

advertise management-tlv (Interface)
Advertise management type, length, values (TLVs) to the specied interface.
Syntax
advertise management-tlv {management-address | system-capabilities | system-
description | system-name}
To remove advertised management TLVs, use the no advertise management-tlv {management-
address | system-capabilities | system-description | system-name} command.
Parameters
management-
address
Enter the keywords management-address to advertise the management IP address
TLVs to the specied interface.
system-capabilities Enter the keywords system-capabilities to advertise the system capabilities TLVs
to the specied interface.
system-description Enter the keywords system-description to advertise the system description TLVs
to the specied interface.
system-name Enter the keywords system-name to advertise the system name TLVs to the specied
interface.
Defaults None
Command Modes INTERFACE (conf-interface-lldp)
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the Z9000 and S4810.
8.3.19.0 Introduced on the S4820T.
clear lldp counters
Clear LLDP transmitting and receiving counters for all physical interfaces or a specic physical interface.
Syntax
clear lldp counters [interface interface]
Link Layer Discovery Protocol (LLDP) 959