Deployment Guide

19 Dell EMC Networking Virtualization Overlay with BGP EVPN
5 Switch preparation
5.1 Check switch OS version
Dell EMC PowerSwitches must be running OS10EE version 10.4.3.1 or later for this deployment.
Run the show version command to check the OS version. Dell EMC recommends upgrading to the latest
release available on Dell Digital Locker (account required).
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved.
OS Version: 10.4.3.1
Build Version: 10.4.3.1.154
Note: For information on installing and upgrading OS10EE, see the Dell EMC Networking OS10 Enterprise
Edition Quick Start Guide.
5.2 Verify license installation
Run the command show license status to verify license installation. The License Type: field should
indicate PERPETUAL as shown in bold below. If an evaluation license is installed, licenses purchased from
Dell EMC are available for download on Dell Digital Locker. Installation instructions are provided in the OS10
Enterprise Edition User Guide Release 10.4.3.0
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : Dell EMC
Product Name : S5248F-ON
Hardware Version : A01
Platform Name : x86_64-dellemc_s5248f_c3538-r0
PPID : CN046MRJCES0089K0004
Service Tag : 68X00Q2
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
Software : OS10-Enterprise
Version : 10.4.3.1
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/68X00Q2.lic
---------------------------------------------------------
Note: If OS10EE was factory installed, a perpetual license is already on the switch.