Deployment Guide

56 Dell EMC Networking Virtualization Overlay with BGP EVPN
10.10 Connect VMs to VDS and port group
In this example, VM network adapters are associated with the VDS and applicable port group.
1. Go to Home > Hosts and Clusters.
2. Right click on a VM, VM-1614-1 in this example, and select Edit Settings.
3. Next to Network adapter 1, select on the drop-down arrow and select Show more networks.
4. Select the applicable port group and VDS from the list. In this case, VNI-1614-PG on Mgmt-VDS is
selected as shown:
Port group and VDS selected
5. Click OK to make the selection.
6. In the Edit Settings window, Network adapter 1 appears as shown:
Virtual wire on App-Tier network selected
7. Click OK to apply the setting.
The network adapter on the VM is now connected to VLAN/VNI 1614. Repeat steps 2-7 for remaining VMs,
placing them on the appropriate VLAN/VNI.