Reference Guide

Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
d* 3.1.2.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.3.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.4.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.5.0/24 80.1.1.2 00:00:12 800 9 8 i
d* 3.1.6.0/24 80.1.1.2 00:00:12 800 9 8 i
Total number of prefixes: 5
Supported Releases 10.3.0E or later
show ip bgp ap-statistics
Displays BGP ap statistics on BGP routes.
Syntax
show ip bgp flap-statistics
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
• Network — Displays the network ID to which the route is apping.
• From — Displays the IP address of the neighbor advertising the apping route
• Duration — Displays the HH:MM:SS since the route rst apped.
• Flaps — Displays the number of times the route apped.
• Reuse — Displays the HH:MM:SS until the apped route is available.
• Path — Lists all AS the apping route passed through to reach the destination network.
Example
OS10# show ip bgp flap-statistics
BGP local router ID is 80.1.1.1
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps Duration Reuse Path
*> 3.1.2.0/24 80.1.1.2 1 00:00:11 00:00:00 800 9 8 i
*> 3.1.3.0/24 80.1.1.2 1 00:00:11 00:00:00 800 9 8 i
*> 3.1.4.0/24 80.1.1.2 1 00:00:11 00:00:00 800 9 8 i
*> 3.1.5.0/24 80.1.1.2 1 00:00:11 00:00:00 800 9 8 i
*> 3.1.6.0/24 80.1.1.2 1 00:00:11 00:00:00 800 9 8 i
Total number of prefixes: 5
Supported Releases 10.3.0E or later
show ip bgp ipv4 unicast
Displays route information for BGP IPv4 routes.
Syntax
show ip bgp ipv4 unicast {ip-address/mask | summary} [denied-routes]
Parameters
• unicast ip-address/mask — Displays IPv4 unicast route information.
• summary — Displays IPv4 unicast summary information.
• denied-routes — (Optional) Displays the congured denied routes.
Default Not congured
Layer 3 301