Reference Guide
Total number of prefixes: 10
OS10#
Supported Releases 10.3.0E or later
show ip bgp peer-group
Displays information on BGP peers in a peer-group.
Syntax
show ip bgp peer-group peer-group-name
Parameters peer-group-name — (Optional) Enter the peer group name to view information about that peer-group only.
Default Not congured
Command Mode EXEC
Usage Information
• Peer-group — Displays the peer group name. Minimum time displays the time interval between BGP
advertisements.
• Administratively shut — Displays the peer group’s status if you do not enable the peer group. If you
enable the peer group, this line does not display.
•
BGP version — Displays the BGP version supported.
• For address family — Displays IPv4 unicast as the address family.
• BGP neighbor — Displays the name of the BGP neighbor.
• Number of peers — Displays the number of peers currently congured for this peer group.
• Peer-group members — Lists the IP addresses of the peers in the peer group. If the address is outbound
optimized, an * displays next to the IP address.
Example
OS10# show ip bgp peer-group bgppg
Peer-group bgppg, remote AS 103
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: Unicast
BGP neighbor is bgppg, peer-group external
Update packing has 4_OCTET_AS support enabled
Example (Summary)
OS10# show ip bgp peer-group ebgp summary
BGP router identifier 32.1.1.1 local AS number 6
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
17.1.1.2 7 7 6 00:01:54 5
Supported Releases 10.2.0E or later
show ip bgp summary
Displays the status of all BGP connections.
Syntax
show ip bgp summary
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
• Neighbor—Displays the BGP neighbor address.
Layer 3 305