Users Guide

• seconds: the range is from 0 to 120.
The default is 5 seconds.
The default level is Level 1.
• Set the LSP size.
ROUTER ISIS mode
lsp-mtu size
• size: the range is from 128 to 9195.
The default is 1497.
• Set the LSP refresh interval.
ROUTER ISIS mode
lsp-refresh-interval seconds
• seconds: the range is from 1 to 65535.
The default is 900 seconds.
• Set the maximum time LSPs lifetime.
ROUTER ISIS mode
max-lsp-lifetime seconds
• seconds: the range is from 1 to 65535.
The default is 1200 seconds.
Example of Viewing IS-IS Conguration (ROUTER ISIS Mode)
To view the conguration, use the show config command in ROUTER ISIS mode or the show running-config isis command in
EXEC Privilege mode.
Dell#show running-config isis
!
router isis
lsp-refresh-interval 902
net 47.0005.0001.000C.000A.4321.00
net 51.0005.0001.000C.000A.4321.00
Dell#
Conguring the IS-IS Metric Style
All IS-IS links or interfaces are associated with a cost that is used in the shortest path rst (SPF) calculations. The possible cost varies
depending on the metric style supported.
If you congure narrow, transition, or narrow transition metric style, the cost can be a number between 0 and 63. If you congure wide or
wide transition metric style, the cost can be a number between 0 and 16,777,215. Dell Networking OS supports ve dierent metric styles:
narrow, wide, transition, narrow transition, and wide transition.
By default, Dell Networking OS generates and receives narrow metric values. Matrixes or costs higher than 63 are not supported. To
accept or generate routes with a higher metric, you must change the metric style of the IS-IS process. For example, if you congure the
metric as narrow, and a link state PDU (LSP) with wide metrics is received, the route is not installed.
Dell Networking OS supports the following IS-IS metric styles.
378
Intermediate System to Intermediate System