Users Guide
1 1 down AC up 8128
1 2 absent absent 0
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed
------------------------------------------------------------------------------------
1 1 up up 9900
1 2 up up 9900
1 3 up up 9900
Speed in RPM
The display command displays additional conguration information.
The no-more command displays the output all at once rather than one screen at a time. This is similar to the terminal length
command except that the no-more option aects the output of the specied command only.
The save command copies the output to a le for future reference.
NOTE: You can lter a single command output multiple times. The save option must be the last option entered. For example:
Dell# command | grep regular-expression | except regular-expression | grep other-regular-
expression | find regular-expression | save.
Multiple Users in Conguration Mode
Dell Networking OS noties all users when there are multiple users logged in to CONFIGURATION mode.
A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY connection, the IP address of
the terminal on which the connection was established. For example:
• On the system that telnets into the switch, this message appears:
% Warning: The following users are currently configuring the system:
User "<username>" on line console0
• On the system that is connected over the console, this message appears:
% Warning: User "<username>" on line vty0 "10.11.130.2" is in configuration mode
If either of these messages appears, Dell Networking recommends coordinating with the users listed in the message so that you do not
unintentionally overwrite each other’s conguration changes.
Conguration
Fundamentals 39