Users Guide

the max-milliwatts option with the power inline auto | static command. Dell Networking also honors the power value
(power requirement) the powered device sends when the port is congured for power inline auto.
Figure 67. Extended Power via MDI TLV
Congure LLDP
Conguring LLDP is a two-step process.
1 Enable LLDP globally.
2 Advertise TLVs out of an interface.
Related Conguration Tasks
• Viewing the LLDP Conguration
• Viewing Information Advertised by Adjacent LLDP Agents
• Conguring LLDPDU Intervals
• Conguring Transmit and Receive Mode
• Conguring a Time to Live
• Debugging LLDP
Important Points to Remember
• LLDP is enabled by default.
• Dell Networking systems support up to eight neighbors per interface.
• Dell Networking systems support a maximum of 8000 total neighbors per system. If the number of interfaces multiplied by eight
exceeds the maximum, the system does not congure more than 8000.
• INTERFACE level congurations override all CONFIGURATION level congurations.
• LLDP is not hitless.
LLDP Compatibility
• Spanning tree and force10 ring protocol “blocked” ports allow LLDPDUs.
• 802.1X controlled ports do not allow LLDPDUs until the connected device is authenticated.
CONFIGURATION versus INTERFACE Congurations
All LLDP conguration commands are available in PROTOCOL LLDP mode, which is a sub-mode of the CONFIGURATION mode and
INTERFACE mode.
• Congurations made at the CONFIGURATION level are global; that is, they aect all interfaces on the system.
• Congurations made at the INTERFACE level aect only the specic interface; they override CONFIGURATION level congurations.
Example of the protocol lldp Command (CONFIGURATION Level)
R1(conf)#protocol lldp
R1(conf-lldp)#?
428
Link Layer Discovery Protocol (LLDP)