Users Guide

[no] enable
Dell(conf-supportassist-serv-default)#enable
Dell(conf-supportassist-serv-default)#
4 Congure the URL to reach the SupportAssist remote server.
SUPPORTASSIST SERVER mode
[no] url uniform-resource-locator
Dell(conf-supportassist-serv-default)#url https://192.168.1.1/index.htm
Dell(conf-supportassist-serv-default)#
Viewing SupportAssist Conguration
To view the SupportAssist congurations, use the following commands.
1 Display information on SupportAssist feature status including any activities, status of communication, last time communication sent,
and so on.
EXEC Privilege mode
show support-assist status
Dell#show support-assist status
SupportAssist Service: Installed
EULA: Accepted
Server: default
Enabled: Yes
URL: https://stor.g3.ph.dell.com
Service status: Enabled
Server: chennai
Enabled: Yes
URL: http://10.16.148.19/
Activity State Last Start Last Success
-------------- ------- ------------------------ ------------------------
full-transfer Success Aug 10 2015 11:15:26 PST Aug 10 2015 11:15:28 PST
2 Display the current conguration and changes from the default values.
EXEC Privilege mode
show running-config support-assist
Dell# show running-config support-assist
!
support-assist
!
activity full-transfer
enable
activity-manifest install testing
!
contact-company name My Company
street-address 123 Main Street
address city MyCity country MyCountry
!
contact-person first john last doe
email-address primary [e-mail]
preferred-method email
!
server default
enable
url https://192.168.1.1/index.htm
3 Display the EULA for the feature.
EXEC Privilege mode
SupportAssist
779