Deployment Guide

10 VCF on VxRail Multirack Deployment using BGP EVPN
1.4 Prerequisites
This deployment guide is a continuation of the deployment guide, VCF on VxRail multirack deploying using
BGP EVPN. That guide provides step-by-step instructions on creating a VCF on VxRail multirack
management domain.
1.5 Supported switches and operating systems
The examples provided in this deployment guide use VxRail 4.7.211 nodes that are connected to Dell EMC
PowerSwitch S5248F-ON switches running Dell EMC OS10 EE 10.4.3.5. The following list of Dell
PowerSwitch devices supports L2 VXLAN (Static VXLAN with VLT or BGP EVPN). It is a reasonable
assumption that any switch listed below can be substituted with minor changes and create a generally similar
outcome outlined in this deployment guide.
Dell EMC PowerSwitch S Series 25-100GbE Switches
• S5224F-ON, S5232F-ON, S5248F-ON (S5200-ON Spec Sheet)
Dell EMC PowerSwitch S Series 10-40GbE Switches
• S4048T-ON
• S4112F-ON, S4112T-ON, S4128F-ON, S4128T-ON, S4148F-ON, S4148FE-ON, S4148T-ON,
S4148U-ON (S4100-ON Spec Sheet)
• S4248U, S4248FB-ON, S4248FBL-ON (S4200-ON Spec Sheet)
• S6010-ON
1.6 Typographical conventions
The CLI and GUI examples in this document use the following conventions:
Monospace Text CLI examples
Underlined Monospace Text CLI examples that wrap the page
Italic Monospace Text Variables in CLI examples
Bold Monospace Text Commands entered at the CLI prompt, or to highlight information in CLI
output
Bold text UI elements and information that is entered in the GUI
1.7 Attachments
This document in .pdf format includes one or more file attachments. To access attachments in Adobe Acrobat
Reader, click the icon in the left pane halfway down the page, then click the icon.