Deployment Guide

51 VCF on VxRail Multirack Deployment using BGP EVPN
3. Click Add.
4. In the Create VM/Host Rules dialog box, type a name for the rule.
5. From the Type drop-down menu, select the appropriate type.
6. Click Add and in the Add Group Member window select either VxRail nodes or Edge nodes to which
the rule applies and click OK.
7. Click OK.
8. Repeat the steps in this section for the remaining rule.
VM/Host groups
VM/Host group name
Type
Members
NSX-T Edge Hosts
Host Group
sfo01w02vxrail01 and sfo01w02vxrail03
NSX-T Edge Nodes
VM Group
sfo01wesg01 and sfo01wesg02
Once the group rules are in place, create a VM/Host rule to bind the VM group Edge nodes to the Host group.
1. Browse to the cluster in the vSphere Client.
2. Click the Configure tab, click VM/Host Rules.
3. Click Add.
4. In the Create VM/Host Rules dialog box, type host-group-rule-edgeCluster
5. From the Type drop-down menu, select Virtual Machines to Hosts.
6. From the VM Group drop-down, select Edge Service Gateways and choose Must run on hosts in
group.
7. From the Host Group drop-down, select Edge Hosts.
8. Click OK.