Administrator Guide

Dell EMC Networking OS creates an ACL entry for each IP+MAC address pair and optionally with its VLAN ID in the binding table and
applies it to the interface.
To display the IP+MAC ACL for an interface for the entire system, use the show ip dhcp snooping source-address-
validation [interface] command in EXEC Privilege mode.
Viewing the Number of SAV Dropped Packets
The following output of the show ip dhcp snooping source-address-validation discard-counters command
displays the number of SAV dropped packets.
DellEMC>show ip dhcp snooping source-address-validation discard-counters
deny access-list on GigabitEthernet 1/1
Total cam count 1
deny count (0 packets)
deny access-list on GigabitEthernet 1/2
Total cam count 2
deny vlan 10 count (0 packets)
deny vlan 20 count (0 packets)
The following output of the show ip dhcp snooping source-address-validation discard-counters interface
interface command displays the number of SAV dropped packets on a particular interface.
DellEMC>show ip dhcp snooping source-address-validation discard-counters interface
GigabitEthernet 1/1
deny access-list on GigabitEthernet 1/1
Total cam count 2
deny vlan 10 count (0 packets)
deny vlan 20 count (0 packets)
Clearing the Number of SAV Dropped Packets
To clear the number of SAV dropped packets, use the clear ip dhcp snooping source-address-validation discard-
counters command.
DellEMC>clear ip dhcp snooping source-address-validation discard-counters
To clear the number of SAV dropped packets on a particular interface, use the clear ip dhcp snooping source-address-
validation discard-counters interface interface command.
DellEMC>clear ip dhcp snooping source-address-validation discard-counters interface
GigabitEthernet 1/1
Dynamic Host Configuration Protocol (DHCP)
253