Administrator Guide

Viewing the entAliasMappingTable MIB
• To view the entAliasMappingTable generated by the system, use the following command.
snmpwalk -v 2c -c public -On 10.16.150.97 1.3.6.1.2.1.47.1.3.2.1
.1.3.6.1.2.1.47.1.3.2.1.2.5.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097157
.1.3.6.1.2.1.47.1.3.2.1.2.9.0 = OID: .1.3.6.1.2.1.2.2.1.1.2097669
.1.3.6.1.2.1.47.1.3.2.1.2.13.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098181
.1.3.6.1.2.1.47.1.3.2.1.2.17.0 = OID: .1.3.6.1.2.1.2.2.1.1.2098693
.1.3.6.1.2.1.47.1.3.2.1.2.21.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099205
.1.3.6.1.2.1.47.1.3.2.1.2.25.0 = OID: .1.3.6.1.2.1.2.2.1.1.2099717
.1.3.6.1.2.1.47.1.3.2.1.2.29.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100228
.1.3.6.1.2.1.47.1.3.2.1.2.30.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100356
.1.3.6.1.2.1.47.1.3.2.1.2.31.0 = OID: .1.3.6.1.2.1.2.2.1.1.2100484
MIB Support for LAG
Dell EMC Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local interface) is to
designate the parameters and flags pertaining to the sending node, while the term Partner (remote interface) is to designate the sending
node’s view of its peer parameters and flags. LACP provides a standardized means for exchanging information, with partner systems, to
form a link aggregation group (LAG). The following table lists the related MIB objects:
Table 103. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link aggregation
module for managing 802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters
and indexed by the ifIndex of the
Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value
carrying the individual MAC address
assigned to the Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated with
the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identifier for
the system that contains the Aggregator.
dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.4 Contains a read–only boolean value (True or
False) indicating whether the Aggregator
represents an Aggregate or an Individual
link.
dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value which is
the current administrative key.
dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value which is
the operational key.
dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC address
value consisting of an unique identifier for
the current Protocol partner of the
Aggregator.
754 Simple Network Management Protocol (SNMP)