Administrator Guide

NOTE: Before executing show commands, you must wait for 10 to 15 seconds for the download-agent process to start.
To view the stack unit information after the reload, use the show system brief command.
DellEMC#show system brief
Stack MAC : 00:01:e8:8c:53:32
Reload Type : normal-reload [Next boot : normal-reload]
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
-----------------------------------------------------------------------
1 Standby online S3048-ON S3048-ON 9.8(0.0P2) 52
2 Management online S3048-ON S3048-ON 9.8(0.0P2) 52
3 Member online S3048-ON S3048-ON 9.8(0.0P2) 52
4 Member online S3048-ON S3048-ON 9.8(0.0P2) 52
5 Member not present
6 Member not present
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
-----------------------------------------------------------
1 1 up AC up 8000
1 2 absent absent 0
2 1 up AC up 8160
2 2 absent absent 0
3 1 up AC up 8000
3 2 absent absent 0
4 1 up AC up 8160
4 2 absent absent 0
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed
-----------------------------------------
1 1 up up 7200
1 2 up up 7200
1 3 up up 7200
2 1 up up 7200
2 2 up up 7200
2 3 up up 7200
3 1 up up 7200
3 2 up up 7200
3 3 up up 7200
4 1 up up 7200
4 2 up up 7200
4 3 up up 7200
The following example shows how to configure two new switches for stacking using 10G ports.
Dell-1(conf)#stack-unit 1 stack-group 1
Setting ports Te 1/50 as stack group will make their interface configs obsolete after
a reload.
[confirm yes/no]:yes
Dell-2(conf)#stack-unit 2 stack-group 0
Setting ports Te 2/49 as stack group will make their interface configs obsolete after
a reload.
[confirm yes/no]:yes
Dell-1#show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link
(Gb/s) Status Status
---------------------------------------------------------
1/50 2/49 10 up up
Stacking
779