Administrator Guide
RFC# Full Name S4810 S3048–ON S4048–ON Z9100–ON S4048T-ON S6010–ON
draft-
ietf-
netmod
-
interfac
es-
cfg-03
Defines a YANG data model for
the configuration of network
interfaces. Used in the
Programmatic Interface RESTAPI
feature.
9.2(0.0) 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
IEEE
802.1A
B
Management Information Base
module for LLDP configuration,
statistics, local system data and
remote systems data
components.
7.7.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
IEEE
802.1A
B
The LLDP Management
Information Base extension
module for IEEE 802.1
organizationally defined discovery
information. (LLDP DOT1 MIB and
LLDP DOT3 MIB)
7.7.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
IEEE
802.1A
B
The LLDP Management
Information Base extension
module for IEEE 802.3
organizationally defined discovery
information. (LLDP DOT1 MIB and
LLDP DOT3 MIB)
7.7.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
ruzin-
mstp-
mib-0 2
(Traps)
Definitions of Managed Objects
for Bridges with Multiple Spanning
Tree Protocol
7.6.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
sFlow.o
rg
sFlow Version 5 7.7.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
sFlow.o
rg
sFlow Version 5 MIB 7.7.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
FORCE
10-
BGP4-
V2-MIB
Force10 BGP MIB (draft-ietf-idr-
bgp4-mibv2-05)
7.8.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
f10–
bmp-
mib
Force10 Bare Metal Provisioning
MIB
9.2(0.0) 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
FORCE
10-FIB-
MIB
Force10 CIDR Multipath Routes
MIB (The IP Forwarding Table
provides information that you can
use to determine the egress port
of an IP packet and troubleshoot
an IP reachability issue. It reports
the autonomous system of the
next hop, multiple next hop
support, and policy routing
support)
9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
FORCE
10-CS-
CHASS
IS-MIB
Force10 C-Series Enterprise
Chassis MIB
9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
FORCE
10-IF-
EXTEN
Force10 Enterprise IF Extension
MIB (extends the Interfaces
portion of the MIB-2 (RFC 1213)
7.6.1 9.8(0.0P2) 9.8(0.0P5) 9.8(1.0) 9.8(1.0) 9.8(1.0)
Standards Compliance 977