Reference Guide

Parameters number — Enter a revision number for the MSTP conguration (0 to 65535).
Default 0
Command Mode MULTIPLE-SPANNING-TREE
Usage Information To have a bridge in the same MST region as another, the default values for the revision number must match on all
Dell hardware devices. If there are non-Dell devices, ensure the revision number value matches on all the devices
(see Non-Dell Hardware).
Example
OS10(conf-mst)# revision 10
Supported Releases 10.2.0E or later
show spanning-tree mst
Displays MST conguration information.
Syntax
show spanning-tree mst configuration
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Enable MSTl prior to using this command.
Example
OS10# show spanning-tree mst configuration
Region Name: asia
Revision: 0
MSTI VID
0 1,7-4093
1 2
2 3
3 4
4 5
5 6
Supported Releases 10.2.0E or later
show spanning-tree msti
Displays MST instance information.
Syntax
show spanning-tree msti [instance-number [brief | guard | interface interface]]
Parameters
• instance-number — (Optional) Displays MST instance information (0 to 63).
• brief — (Optional) Displays MST instance summary information.
• guard — (Optional) Displays which guard is enabled and current port state.
• interface interface — (Optional) Displays interface type information:
• ethernet node/slot/port[:subport] — Enter the Ethernet port information (1 to 48).
• port-channel — Enter the port-channel interface information (1 to 128).
Default Not congured
Command Mode EXEC
Layer 2 149