Reference Guide
Set time and date
OS10# clock set 18:30:10 2017-01-25
View system time and date
OS10# show clock
2017-01-25T18:30:17.92+00:00
System Time and Date Commands
clock set
Sets the system time.
Syntax
clock set time year-month-day
Parameters
time Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1
to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00.
year-month-day Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year,
such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31.
Default Not congured
Command Mode EXEC
Usage Information Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardware-
based real-clock time (RTC) resets to the new time. The new system clock setting is applied immediately. It is not
necessary to commit the change.
Example
OS10# clock set 18:30:10 2017-01-25
Supported Releases 10.2.1E or later
show clock
Displays the current system clock settings.
Syntax
show clock
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The universal time coordinated (UTC) value is the number of hours that your time zone is later than or earlier than
UTC/Greenwich mean time.
Example
OS10# show clock
2017-01-25T11:00:31.68-08:00
Supported Releases 10.2.1E or later
System management 355