Reference Guide
clear counters interface eee
Clears all EEE counters.
Syntax
clear counters interface eee
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use this command to clear all EEE counters.
Example
OS10# clear counters interface eee
Clear all eee counters [confirm yes/no]:yes
Supported Releases 10.3.0E or later
clear counters interface ethernet eee
Clears EEE counters on a specied interface.
Syntax
clear counters interface ethernet node/slot/port[:subport] eee
Parameters node/slot/port[:subport]—Enter the interface information.
Default Not congured
Command Mode EXEC
Usage Information Use this command to clear EEE counters on a specied Ethernet interface.
Example
OS10# clear counters interface 1/1/48 eee
Clear eee counters on ethernet1/1/48 [confirm yes/no]:yes
Supported Releases 10.3.0E or later
eee
Enables or disables energy-ecient Ethernet (EEE) on physical ports.
Syntax
eee
Parameters None
Default Enabled on Base-T devices and disabled on S3048-ON and S4048T-ON.
Command Mode Interface
Usage Information To disable EEE, use the no version of this command.
Example (Enable
EEE)
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# eee
OS10(conf-if-eth1/1/1)# do commit
Example (Disable
EEE)
OS10(config)# interface ethernet 1/1/2
OS10(conf-if-eth1/1/2)# no eee
OS10(conf-if-eth1/1/2)# do commit
358 System management