Reference Guide
INTERFACE
Usage Information Use the show qos maps type [tc-queue | trust-map-dot1p | trust-map-dscp] [string]
command to view the current trust mapping. You should change the trust map only during no trac ow, and
verify the correct policy maps are applied. The no version of this command returns the value to the default.
Example
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# trust-map dscp dscp-trustmap1
OS10(conf-if-eth1/1/1)# commit
Supported Releases 10.3.0E or later
494 Quality of service