Reference Guide

VLT VLAN mismatch:
VLT ID : 1
VLT Unit ID Mismatch VLAN List
--------------------------------
* 1 1
2 2
VLT ID : 2
VLT Unit ID Mismatch VLAN List
----------------------------------
* 1 1
2 2
View VLT port details
* indicates the local peer
OS10# show vlt 1 vlt-port-detail
VLT port channel ID : 1
VLT Unit ID Port-Channel Status Configured ports Active ports
----------------------------------------------------------------------
* 1 port-channel1 down 2 0
2 port-channel1 down 2 0
VLT port channel ID : 2
VLT Unit ID Port-Channel Status Configured ports Active ports
----------------------------------------------------------------------
* 1 port-channel2 down 1 0
2 port-channel2 down 1 0
VLT port channel ID : 3
VLT Unit ID Port-Channel Status Configured ports Active ports
----------------------------------------------------------------------
2 port-channel3 down 1 0
View VLT running conguration
OS10# show running-configuration vlt
!
vlt domain 1
peer-routing
discovery-interface ethernet1/1/17
!
interface port-channel1
vlt-port-channel 10
!
interface port-channel10
vlt-port-channel 20
!
interface port-channel20
vlt-port-channel 20
VLT commands
delay-restore
Congures a time interval to delay the bringing up of VLT ports after reload or peer-link restoration between the VLT peer switches.
Syntax
delay-restore seconds
Parameters seconds — Enter a delay time, in seconds to delay bringing up VLT ports after the VLTi device is reloaded (1 to
1200).
Default 90 seconds
Command Mode VLT-DOMAIN
Virtual link trunking 503