Reference Guide

1 Create a network-qos class map to classify PFC trac classes in CONFIGURATION mode (0 to 7). Specify the trac classes using
the match qos-group command. Qos-groups map 1:1 to trac classes 0 to 7 (qos-group 1 corresponds to trac class 1).
Enter a single value, a hyphen-separated range, or multiple
qos-group values separated by commas in CLASS-MAP mode.
class—map type network-qos class—map-name
match qos-group {0-7}
exit
2 (Optional) Repeat Step 1 to congure additional PFC trac-class class-maps.
Congure pause and ingress buers for PFC trac
See PFC conguration notes for the default ingress queue settings and the default dot1p priority-queue mapping.
1 Create a network-qos policy map in CONFIGURATION mode.
policy-map type network-qos policy—map-name
2 Associate the policy-map with a network-qos class map in POLICY-MAP mode.
class class-map-name
3 Congure default values for ingress buers used for the network-qos class maps in POLICY-CLASS-MAP mode.
pause
(Optional) Change the default values for the ingress-buer size reserved for the network-qos class-map trac and the thresholds
used to send XOFF and XON pause frames (in kilobytes).
pause [buffer-size kilobytes {pause-threshold kilobytes | resume-threshold kilobytes}]
4 Enable the PFC pause function for dot1p trac in POLICY-CLASS-MAP mode. The dot1p values must be the same as the qos-
group
(trac class) numbers in the class map in Step 2. Enter a single dot1p value (0-7), a hyphen-separated range, or multiple dot1p
values separated by commas.
pfc-cos dot1p-priority
5 (Optional) Set the static and dynamic thresholds used to limit the shared buers allocated to PFC trac-class queues. Congure a
static, xed queue-limit (in kilobytes) or a dynamic threshold (weight 1-10; default 9) based on the available PFC shared buers.
queue-limit thresh-mode {static kilobytes | dynamic weight}
6 (Optional) Repeat Steps 2–4 to congure PFC on additional trac classes.
Apply service policy and enable PFC
1 Apply the PFC service policy on an ingress interface or interface range in INTERFACE mode.
interface ethernet node/slot/port:[subport]
service-policy input type network-qos policy—map-name
interface range ethernet node/slot/port:[subport]-node/slot/port[:subport]
service-policy input type network-qos policy—map-name
2 Save the conguration.
do commit
3 Enable PFC (without DCBX) for FCoE and iSCSI trac in INTERFACE mode.
priority-flow-control mode on
4 Save the conguration.
do commit
Congure PFC shared buer
Congure the total amount of shared buers available to PFC-enabled interfaces on the switch in SYSTEM-QOS mode (0 to 7787
kilobytes; default 832).
pfc-shared-buffer-size kilobytes
Congure PFC
Converged data center services
513