Reference Guide

Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use the details option to display PFC statistics on received/transmitted frames for each dot1p (CoS) value, and
use the clear interface priority-flow-control command to delete PFC statistics and restart the
counter.
Example
OS10# show interface priority-flow-control
Interface mode OperStatus PFC Priorities PFC Rx PFC Tx
------------------------------------------------------------------
TenGig 0/0 on off 0 0 0
TenGig 0/1 on on 0,4,7 300 200
Example (details)
OS10(config)# show interface ethernet 1/1/15 priority-flow-control details
ethernet1/1/15
Admin Mode : true
Operstatus: true
PFC Priorities: 3
Total Rx PFC Frames: 0
Total Tx PFC frames: 587236
Cos Rx Tx
-----------------------
0 0 0
1 0 0
2 0 0
3 0 587236
4 0 0
5 0 0
6 0 0
7 0 0
Supported Releases 10.3.0E or later
Enhanced transmission selection
Enhanced transmission selection (ETS) provides customized bandwidth allocation to 802.1p classes of trac. Assign dierent amounts of
bandwidth to trac classes (Ethernet, FCoE, or iSCSI) that require dierent bandwidth, latency, and best-eort treatment during network
congestion.
ETS divides trac into dierent priority groups using their 802.1p priority value. To ensure that each trac class is correctly prioritized and
receives required bandwidth, congure bandwidth and queue scheduling for each priority group. You can allocate more bandwidth to a
priority group to prioritize low-latency storage and server-cluster trac. Allocate less bandwidth to a dierent priority group to rate-limit
best-eort LAN trac.
Converged data center services
519