Reference Guide

• log-warning — Warning conditions.
• log-notice — Normal but signicant conditions (default).
• log-info — Informational messages.
• log-debug — Debug messages.
Defaults Log-notice
Command Mode CONFIGURATION
Usage Information Starting from 10.3.0E or later, this command supports IPv6 addresses. The previous versions support only IPv4
addresses. The no version of this command deletes the syslog server.
Example
OS10# logging server dell.com severity log-info
OS10(config)# logging server fda8:6c3:ce53:a890::2
OS10(config)# commit
Supported Releases 10.2.0E or later
show logging
Displays system logging messages by log-le, process-names, or summary.
Syntax
show logging {log-file [process-name | line-numbers] | process-names}
Parameters
• process-name — (Optional) Enter the process-name to use as a lter in syslog messages.
• line-numbers — (Optional) Enter the number of lines to include in the logging messages (1 to 65535).
Default None
Command Mode EXEC
Usage Information The output from this command is the /var/log/eventlog le.
Example (Log-File)
OS10# show logging log-file process-name dn_qos
Example (Process-
Names)
OS10# show logging process-names
dn_pas_svc
dn_system_mgmt_
dn_env_tmpctl
dn_pm
dn_eth_drv
dn_etl
dn_eqa
dn_alm
dn_eqm
dn_issu
dn_swupgrade
dn_ifm
dn_ppm
dn_l2_services
dn_dot1x
dn_l3_core_serv
dn_policy
dn_qos
dn_switch_res_m
dn_ospfv3
dn_lacp
dn_i3
594 Troubleshoot OS10