Reference Guide

dot1x re-authentication
Enables periodic re-authentication of 802.1X supplicants.
Syntax
dot1x re-authentication
Parameters None
Default Disabled
Command Mode INTERFACE
Usage Information The no version of this command disables the periodic re-authentication of 8021.X supplicants.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x re-authentication
OS10(conf-range-eth1/1/7-1/1/8)# do commit
Supported Releases 10.2.0E or later
dot1x timeout quiet-period
Sets the number of seconds that the device remains in quiet state following a failed authentication exchange with a supplicant.
Syntax
dot1x timeout quiet-period seconds
Parameters quiet period seconds — Enter the number of seconds for the 802.1X quiet period timeout (1 to 65535).
Default 60 seconds
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout quiet-period 120
OS10(conf-range-eth1/1/7-1/1/8)# do commit
Supported Releases 10.2.0E or later
dot1x timeout re-authperiod
Sets the number of seconds between re-authentication attempts.
Syntax
dot1x timeout re-authperiod seconds
Parameters re-authperiod seconds — Enter the number of seconds for the 802.1X re-authentication timeout (1 to
65535).
Default 3600 seconds
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default.
Example
OS10(conf-range-eth1/1/7-1/1/8)# dot1x timeout re-authperiod 7200
OS10(conf-range-eth1/1/7-1/1/8)# do commit
Supported Releases 10.2.0E or later
96 Layer 2