Users Guide

Command Mode EXEC
Usage
Information
Use this command to view a detailed list of fabrics configured.
This command is supported in both Full Switch and SmartFabric modes.
Supported on the MX9116n and MX5108n switches starting in release 10.5.0.1. Also available on SFS-
supported OS10 switches starting in release 10.5.0.3. For supported platforms, see SmartFabric Services
for leaf and spine.
Example (IOM)
MX9116N-A1# show smartfabric details
----------------------------------------------------------
Name : A1-A2
Description :
ID : fc6c9051-f499-4816-a54a-25ef6fef2e33
DesignType : 2xMX9116n_Fabric_Switching_Engines_in_same_chassis
Validation Status: VALID
VLTi Status : VALID
Placement Status : VALID
Nodes : 3GB1XC2, 9A2HEM3
----------------------------------------------------------
Example (VxRail)
OS10# show smartfabric details
----------------------------------------------------------
Name : AutoFab-08ee685b-d6d6-5d0c-99d2-ae78f800d4b7
Description : Auto-Fabric Generator
ID : 08ee685b-d6d6-5d0c-99d2-ae78f800d4b7
DesignType : AutoFabricDesign--1
Validation Status: VALID
VLTi Status : VALID
Placement Status : VALID
Nodes : CAC00N2, AZY1234
----------------------------------------------------------
----------------------------------------------------------
Name : AutoFab-100
Description : Auto-Fabric Generator
ID : 100
DesignType :
Validation Status: VALID
VLTi Status : VALID
Placement Status : VALID
Nodes : AZY1234, CAC00N2, 9GTWNK2, FHTWNK2
----------------------------------------------------------
Supported
Releases
10.5.0.1 or later
show smartfabric networks
Displays all network profile information such as ID, QoS priority type, and VLAN.
Syntax
show smartfabric networks
Parameters None
Default None
Command Mode EXEC
Usage
Information
Use this command to view detailed description of the configured network profiles.
This command is supported in both Full Swtich and SmartFabric modes.
Supported on the MX9116n and MX5108n switches starting in release 10.5.0.1. Also available on SFS-
supported OS10 switches starting in release 10.5.0.3. For supported platforms, see SmartFabric Services
for leaf and spine.
146 SmartFabric Services