Users Guide
SupportAssist company commands
address
Configures the company address.
Syntax
address city name state name country name zipcode number
Parameters
● city name—Enter the keyword and the city name.
● state name—Enter the keyword and the state name.
● country name—Enter the keyword and the country code.
● zipcode number—Enter the keyword and the zip code.
Default Not configured
Command Mode SUPPORT-ASSIST contact company sub-mode
Usage
Information
Enter ? to view a list of supported country names and codes. You can also find this information at the
following location: Country names and codes. The no version of this command removes the configuration.
Example
OS10(conf-support-assist-ExampleCompanyName)# address city SanJose state
California country USA zipcode 95123
Supported
Releases
10.2.0E or later
contact-person
Configures the contact name for an individual.
Syntax
contact-person {first firstname last lastname}
Parameters
● first firstname — Enter the keyword and the first name of the contact person. Use double
quotes for more than one first name.
● last lastname — Enter the keyword and the last name of the contact person.
Default Not configured
Command Mode SUPPORT-ASSIST
Usage
Information
The no version of this command removes the configuration.
Example
OS10(conf-support-assist-ExampleCompanyName)# contact-person first
Firstname last Lastname
Supported
Releases
10.2.0E or later
street-address
Configures the street address of the company.
Syntax
street-address {line-1} [line-2] [line-3]
Parameters line-1 line-2 line-3 — Enter the address of the company, from 1 to 3 lines. Enclose the text
within double quotes. Insert a space after each line of text.
Default Not configured
Command Mode
● SUPPORT-ASSIST
Usage
Information
The no version of this command removes the configuration.
Troubleshoot Dell EMC SmartFabric OS10 1799