Users Guide

Rapid availability is crucial for applications such as emergency call service location (E911).
● Configure fast start repeat count which is the number of packets that are sent during activation in CONFIGURATION mode,
from 1 to 10, default 3.
lldp-med fast-start-repeat-count number
Configure fast start repeat count
OS10(config)# lldp med fast-start-repeat-count 5
LLDP commands
clear lldp counters
Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all physical interfaces.
Syntax
clear lldp counters
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The counter default value resets to zero for all physical interfaces.
Example
OS10# clear lldp counters
Supported
Releases
10.2.0E or later
clear lldp table
Clears LLDP neighbor information for all interfaces.
Syntax
clear lldp table
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Neighbor information clears on all interfaces.
Example
OS10# clear lldp table
Supported
Releases
10.2.0E or later
lldp enable
Enables or disables LLDP globally.
Syntax
lldp enable
Parameters None
Default Enabled
578 Layer 2