Users Guide

Default Not configured
Command Mode INTERFACE
Usage
Information
Attach only one network policy for per interface.
Example
OS10(conf-if-eth1/1/5)# lldp med network-policy add 1
Supported
Release
10.2.0E or later
lldp med tlv-select
Configures the LLDP-MED TLV type to transmit or receive.
Syntax
lldp med tlv-select {network—policy | inventory}
Parameters
● network-policy — Enable or disable the port description TLV.
● inventory — Enable or disable the system TLV.
Default Enabled
Command Mode INTERFACE
Usage
Information
None
Example
OS10(conf-if-eth1/1/3)# lldp med tlv-select network-policy
Supported
Releases
10.2.0E or later
lldp port-description-tlv advertise
Specifies whether to advertise the interface description or the port id in the port description TLV.
Syntax
lldp port-description-tlv advertise [description | port-id]
Parameters
● description — Advertise interface description.
● port-id — Advertise port id.
Default Interface description is advertised.
Command Mode INTERFACE
Usage
Information
Determines whether to advertise the interface description or the port ID in the port description TLV.
According to RFC 2863, the LLDPLocPortDesc and ifDescr object values must be identical.
To be compliant with RFC 2863, use the port-id option with the lldp port-description-tlv
advertise command. The port-id option in this command returns the same value (port ID) for both
LLDPLocPortDesc and ifDescr objects.
Example
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise description
OS10(conf-if-eth1/1/1)# lldp port-description-tlv advertise port-id
Supported
Releases
10.4.3.0 or later
Layer 2 581