Users Guide

Supported
Releases
10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the Management port.
Syntax
show ip management-route [all | connected | dynamic | static summary]
Parameters
● all — (Optional) Display the IPv4 routes that the Management port uses.
● connected — (Optional) Display only routes directly connected to the Management port.
● dynamic — (Optional) Display active management routes that are learned by a routing protocol.
● summary — (Optional) Display the number of active and non-active management routes and their
remote destinations.
● static — (Optional) Display active static management routes.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv4 static and connected routes configured for the Management port.
Use the management route command to configure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
-----------------------------------------------------------------
192.168.10.0/24 managementethernet Connected Connected
Supported
Releases
10.2.2E or later
show ipv6 management-route
Displays the IPv6 routes used to access the Management port.
Syntax
show ipv6 management-route [all | connected | static | summary]
Parameters
● all — (Optional) Display the IPv6 routes that the Management port uses.
● connected — (Optional) Display only routes directly connected to the Management port.
● summary — (Optional) Display the number of active and non-active management routes and their
remote destinations.
● static — (Optional) Display active static management routes.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv6 static and connected routes configured for the Management port.
Use the management route command to configure an IPv4 or IPv6 management route.
Example
OS10# show ipv6 management-route
Destination Gateway State
----------- ------- -----
2001:34::0/64 ManagementEthernet 1/1 Connected
2001:68::0/64 2001:34::16 Active
Supported
Releases
10.2.2E or later
92 CLI Basics