Reference Guide

Simple password authentication enabled
Neighbor Count is 0, Adjacent neighbor count is 0
Supported
Releases
10.2.0E or later
show ip ospf routes
Displays OSPF routes received from neighbors along with parameters like cost, next-hop, area, interface, and type of route.
Syntax
show ip ospf [process-id] routes [prefix IP-prefix]
Parameters
● process-id — (Optional) Enter OSPFv2 Process ID to view information specific to the ID.
● IP-prefix — (Optional) Specify an IP address to view information specific to the IP address.
Default None
Command Mode EXEC
Usage
Information
Displays the cost metric for each neighbor and interfaces.
Example
OS10# show ip ospf 10 routes
Prefix Cost Nexthop Interface Area
Type
110.1.1.0 1 0.0.0.0 vlan3050 0.0.0.0
intra-area
111.1.1.0 1 0.0.0.0 vlan3051 0.0.0.0
intra-area
111.2.1.0 1 0.0.0.0 vlan3053 0.0.0.0
intra-area
Supported
Releases
10.2.0E or later
show ip ospf statistics
Displays OSPF traffic statistics.
Syntax
● show ip ospf [instance-number] statistics [interface interface]
Parameters
● instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
● interface interface — (Optional) Enter the interface information:
○ ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
○ port-channel number — Enter the port-channel interface number (1 to 128).
○ vlan vlan-id — Enter the VLAN ID number (1 to 4093).
Default Not configured
Command Mode EXEC
Usage
Information
This command displays OSPFv2 traffic statistics for a specified instance or interface, or for all OSPFv2
instances and interfaces.
Example
OS10# show ip ospf 10 statistics
Interface vlan3050
Receive Statistics
rx-invalid 0 rx-invalid-bytes 0
rx-hello 0 rx-hello-bytes 0
rx-db-des 0 rx-db-des-bytes 0
rx-ls-req 0 rx-ls-req-bytes 0
rx-ls-upd 0 rx-ls-upd-bytes 0
rx-ls-ack 0 rx-ls-ack-bytes 0
Transmit Statistics
412 Layer 3