Reference Guide

● Enter Minutes offset from UTC, ranging from 0 to 59.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
Universal time coordinated (UTC) is the time standard based on Greenwich Mean time. To set the time
zone for the system clock, enter the difference of hours between UTC and your time zone.
Example
OS10(config)# clock timezone IST 5 30
Supported
Releases
10.3.0E or later
show clock
Displays the current system clock settings.
Syntax
show clock
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The universal time coordinated (UTC) value is the number of hours that your time zone is later than or
earlier than UTC/Greenwich mean time.
Example
OS10# show clock
2017-01-25T11:00:31.68-08:00
Supported
Releases
10.2.1E or later
System banners
You can configure a system login and message of the day (MOTD) text banners. The system login banner displays before you
log in. The MOTD banner displays immediately after a successful login.
You can reset the banner text to the Dell EMC default banner or disable the banner display.
Login banner
Configure a system login banner that displays before you log in using interactive mode. Starting and ending double-quotes are
not necessary. Enter a single delimiter character or the key combination ^C to specify the start and end of the text banner.
1. Enter the banner login command with a single delimiter character and press Enter.
2. Enter each line of text and press Enter. Enter a maximum of 4096 characters. There is no limit to the number of lines.
3. Complete the banner configuration by entering a line that contains only the delimiter character.
● Enable a login banner in CONFIGURATION mode. Enclose the delimiters and banner text in double-quotes.
banner login delimiter <Enter>
banner-text <Enter>
banner-text <Enter>
... <Enter>
delimiter
Configure login banner
OS10(config)# banner login %
DellEMC S4148U-ON login
486
System management