Reference Guide

1 2 Switch board temp sensor 28
1 3 System Inlet Ambient-1 temp sensor 27
1 4 System Inlet Ambient-2 temp sensor 25
1 5 System Inlet Ambient-3 temp sensor 26
1 6 Switch board 2 temp sensor 31
1 7 Switch board 3 temp sensor 41
1 8 NPU temp sensor 43
Supported
Releases
10.2.0E or later
show inventory
Displays system inventory information.
Syntax
show inventory
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show inventory
Product : S4048ON
Description : S4048-ON 48x10GbE, 6x40GbE QSFP+ Interface Module
Software version : 10.4.1.0.X.9
Unit Type Part Number Rev Piece Part ID Svc Tag Exprs Svc Code
-------------------------------------------------------------------------------------------
* 1 S4048ON ----
1 S4048ON-PWR-2-AC-R 0T9FNW X01 TW-0T9FNW-28298-49Q-0034 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-1-R 0MGDH8 X01 TW-0MGDH8-28298-49Q-0451 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-2-R 0MGDH8 X01 TW-0MGDH8-28298-49Q-0450 AEIOU## 226 457 410 55
1 S4048ON-FANTRAY-3 P1FAN1 A01 CN-123456-FAN10-058-901
Supported
Releases
10.2.0E or later
show ip management-route
Displays the IPv4 routes used to access the management port.
Syntax
show ip management-route [all | connected | summary]
Parameters
● all — (Optional) Display the IPv4 routes that the management interface uses.
● connected — (Optional) Display only routes directly connected to a management interface.
● summary — (Optional) Display the number of active and non-active management routes and their
remote destinations.
● static — (Optional) Display non-active management routes.
Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv4 static and connected routes configured for the management port.
Use the management route command to configure an IPv4 or IPv6 management route.
Example
OS10# show ip management-route
Destination Gateway State Source
Getting Started 65