Administrator Guide

Figure 103. VLAN Stacking in a Service Provider Network
Important Points to Remember
• Interfaces that are members of the Default VLAN and are congured as VLAN-Stack access or trunk ports do not switch untagged
trac. To switch trac, add these interfaces to a non-default VLAN-Stack-enabled VLAN.
• Dell Networking cautions against using the same MAC address on dierent customer VLANs, on the same VLAN-Stack VLAN.
• You cannot ping across the trunk port link if one or both of the systems is an S3048–ON.
• This limitation becomes relevant if you enable the port as a multi-purpose port (carrying single-tagged and double-tagged trac).
Congure VLAN Stacking
Conguring VLAN-Stacking is a three-step process.
1 Creating Access and Trunk Ports
740
Service Provider Bridging