Administrator Guide
Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Introduced.
Related Commands
• forward-delay — amount of time the interface waits in the Blocking State and the Learning State before
transitioning to the Forwarding State.
• hello-time — change the time interval between BPDUs.
msti
Congure multiple spanning tree instance, bridge priority, and one or multiple VLANs mapped to the MST instance.
Syntax
msti instance {vlan range | bridge-priority priority}
To disable mapping or bridge priority, use the no msti instance {vlan range | bridge-priority
priority} command.
Parameters
msti instance Enter the MSTP instance. The range is from zero (0) to 63.
vlan range Enter the keyword vlan then the identier range value. The range is from 1 to 4094.
bridge-priority
priority
Enter the keywords bridge-priority then a value in increments of 4096 as the
bridge priority. The range is from zero (0) to 61440.
Valid priority values are: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864,
40960, 45056, 49152, 53248, 57344, and 61440. All other values are rejected.
Defaults default bridge-priority is 32768.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
1002 Multiple Spanning Tree Protocol (MSTP)