Administrator Guide

hop–limit
Enable the verication of the advertised hop count limit. If this command is not congured, the verication process is bypassed.
Syntax
hop-limit {maximum | minimum limit}
To reset the hop count limit, use the no hop-limit {maximum | minimum limit} command.
Parameters
maximum limit Enter the keyword maximum then the hop limit value. The range is from 0 to 254.
minimum limit Enter the keyword minimum then the hop limit value. The range is from 0 to 254.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the C9010.
9.9(0.0) Introduced on the Z9500.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Related Commands
• ipv6 nd ra-guard enable — congure the RA guard related commands.
• ipv6 nd raguard policy policy-name — dene the RA guard policy name and enter the RA guard policy
conguration mode.
ipv6 nd ra–guard attach–policy
Apply the IPv6 RA guard to a specic interface.
Syntax
ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan 2, vlan 3.....]]
Parameters
policy policy-name Enter the keyword policy then the policy name. The policy-name allows a maximum of
140 characters.
vlan [vlan 1, vlan 2,
vlan 3........]
Enter the keyword vlan then the VLAN range. The VLAN range is from 1 to 4094.
Defaults None
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1030 Neighbor Discovery Protocol (NDP)