Administrator Guide

Related Commands
• threshold metric – congure the metric threshold used to determine the UP and/or DOWN state of a tracked
route.
• track ip route metric threshold – congure object tracking on the threshold of an IPv4 route metric.
IPv6 Object Tracking Commands
The following section describes the IPv6 object tracking commands.
The following object tracking commands apply to IPv4 and IPv6:
• debug track
• delay
• description
• show running-cong track
• threshold metric
• track interface line-protocol
show track ipv6 route
Display information about all tracked IPv6 routes, including conguration, current tracked state (UP or DOWN), and the clients which are
tracking an object.
Syntax
show track ipv6 route [brief]
Parameters
brief (OPTIONAL) Display a single line summary of information for tracked IPv6 routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track ipv6 route command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type slot/
port, IP route ip-
Displays the interface type and slot/port number or address of the IPv4/IPv6 route that is
being tracked.
1054 Object Tracking