Administrator Guide
no-summary (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA.
Defaults Not congured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
area range
Summarize routes matching an address/mask at an area border router (ABR).
S3048–ON
Syntax
area area-id range ip-address mask [not-advertise]
To disable route summarization, use the no area area-id range ip-address mask command.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
ip-address Specify an IP address in dotted decimal format.
mask Specify a mask for the destination prex. Enter the full mask (for example,
255.255.255.0).
not-advertise (OPTIONAL) Enter the keywords not-advertise to set the status to DoNotAdvertise
(that is, the Type 3 summary-LSA is suppressed and the component networks remain
hidden from other areas.)
Open Shortest Path First (OSPFv2 and OSPFv3) 1063