Administrator Guide

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.

8.4.2.1 Introduced on the C-Series and S-Series.

8.4.2.0 Introduced on the E-Series.

7.7.1.0 Introduced on the E-Series.

Related Commands

• ip redirect-list – enable an IP Redirect List.

ip redirect-group

Apply a redirect list (policy-based routing) on an interface. You can apply multiple redirect lists to an interface by entering this command

multiple times.

Syntax

ip redirect-group redirect-list-name test [l2–switch]

To remove a redirect list from an interface, use the no ip redirect-group name command.

Parameters

redirect-list-name Enter the name of a congured redirect list.

l2–switch Enter the keyword l2–switch to enable PBR on Layer2 (switched) trac.

Defaults None

Command Modes INTERFACE (conf-if-vl-)

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.