Administrator Guide
show ip pim snooping tib
Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast group members and states.
Syntax
show ip pim snooping tib [vlan vlan-id] [group-address [source-address]]
Parameters
vlan vlan-id (OPTIONAL) Enter a VLAN ID to display TIB information PIM-SM snooping discovered on
a specied VLAN. The valid VLAN IDs range is from 1 to 4094.
group-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display TIB
information PIM-SM snooping discovered for a specied multicast group.
source-address (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display TIB
information PIM-SM snooping discovered for a specied multicast source.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.1.1 Introduced on the E-Series.
Usage Information The following describes the show ip pim snooping tib commands shown in the following example.
Field Description
(S, G) Displays the entry in the PIM multicast snooping database.
uptime Displays the amount of time the entry has been in the PIM multicast route table.
expires Displays the amount of time until the entry expires and is removed from the database.
RP Displays the IP address of the RP/source for this entry.
ags List the ags to dene the entries:
• S = PIM Sparse Mode
• C = directly connected
• L = local to the multicast group
• P = route was pruned
• R = the forwarding entry is pointing toward the RP
• F = Dell Networking OS is registering this entry for a multicast source
• T = packets were received via Shortest Tree Path
1210 PIM-Sparse Mode (PIM-SM)