Administrator Guide
Version Description
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The list of secondary VLANs can be:
• Specied in comma-delimited or hyphenated-range format.
• Specied with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related Commands
• private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
• switchport mode private-vlan — sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
S3048
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan command.
Parameters
host Enter the keyword host to congure the selected port or port channel as an isolated
interface in a PVLAN.
promiscuous Enter the keyword promiscuous to congure the selected port or port channel as an
promiscuous interface.
trunk Enter the keyword trunk to congure the selected port or port channel as a trunk port
in a PVLAN.
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Private VLAN (PVLAN) 1231